Mouser stocking iMOTION IMC100 motor control ICs for variable speed drives

Mouser Electronics is now stocking the IMC100 series, a new family of iMOTION motor control ICs from Infineon Technologies. These ready-to-use solutions for high-efficiency, variable-speed drives integrate both the required hardware and control algorithm for a permanent magnet synchronous motor.

The IMC100 series ICs are based on Infineon’s proven Motion Control Engine (MCE), which implements field-oriented control (FOC) and eliminates software coding from the development of motor control algorithms. The FOC uses single- or leg-shunt current feedback and space-vector PWM with sinusoidal signals to achieve high energy efficiency. The ICs also provide protection features like over- and under-voltage, over-current, rotor lock to safeguard the motor and power stage. The IMC100 devices provide highly flexible communication interfaces, including UART, SPI, I2C, analog input, frequency input, and CAN.

The IMC100 series ICs are supported by the iMOTION Modular Application Design Kit for motor control (iMOTION MADK), EVAL-M1-101T evaluation control board, and EVAL-M3-102T evaluation board. The iMOTION MADK is a compact and flexible evaluation system that provides a scalable design platform for three-phase motor drives ranging from 20W to 300W. The EVAL-M1-101T evaluation control board and EVAL-M3-102T evaluation board connect to the iMOTION MADK and are capable of providing three-phase modulation or type 3 of two-phase modulation. The Infineon iMOTION IMC100 series ICs are ideal for motor control applications in home appliances, air conditioning units, fans, and pumps.


Bs&T at PCIM2018

powerlosstester presenting BsT-pulse 3 phase version and BsT-SQ for powerloss measurement of inductive components new findings of tester, the highest Bs ferrite material D9B for SiC application GaN fe...


Würth and AnDAPT describe their new programmable power solution

In this video an engineer from AnDAPT describes their new programmable power solution and their partnership with Würth at the APEC exhibition  in San Antonio, Texas. Drawing from Würth&...


MAGMENT: Magnetizable concretes, sole enablers for dynamic inductive wireless charging.

MAGMENT is a patented material technology, engineered from cement and magnetic particles from recycled electronic waste. We are the inventors and sole company worldwide to offer both the concrete mate...


A look at Analog Devices' wireless power demonstration at APEC 2018

In this video Steve from Analog Devices walks us through a wireless power transmission demonstration at APEC 2018 in San Antonio, Texas. The LTC4120 is a constant-current/constant-voltage wireless rec...


Analog Devices talks about their Power over Ethernet solutions at APEC

In this video Analog Devices talks about their Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. Their LTC4291 provides four PSE Ports with two power channels per port, and is fully co...


Silicon Labs demonstrates their latest PoE solutions at APEC 2018

In this video John Wilson of Silicon Labs demonstrates their latest Power over Ethernet solutions at APEC 2018 in San Antonio, Texas. The live demonstration shows how a remote device can effectively p...


Vitrek explains their advanced testing solutions at APEC 2018

In this video Vitrek explains their advanced testing solutions at APEC 2018 in San Antonio, Texas. The devices displayed includes their 4700 high-voltage meter, which can measure up to 10kV and can pe...


Dirk Giesen describes the Parasoft tool suite for Embedded Software Development

Are you responsible for embedded software development in your organization? Your goal should be to create safe, secure, and reliable software. To make sure your device will work properly, deploy Paras...


Ross Sabolik of Silicon Labs talks about advanced Power over Ethernet

In this video Ross Sabolik of Silicon Labs talks about smart  Power over Ethernet systems with Alix Paultre at their APEC exhibit in San ANtonio, Texas. As PoE migrates to higher power levels and...


Dialog Semi walks through their latest IC solutions for battery chargers

In this video an engineer from Dialog Semiconductor walks us through their latest ICs for battery chargers at APEC 2018. Dialog's Qualcomm Quick Charge adapter solutions offer high efficiency to e...


Steve Allen of pSemi explains their latest LED driver solution

Steve Allen of pSemi explains their latest LED boost product based on Arctic Sand's two-stage architecture. Their PE23300 has a charge-pump, switched-capacitor architecture that offloads most of t...


Teledyne describes their latest 12-bit Wavepro HD oscilloscope

In this video Teledyne LeCroy describes their latest Wavepro HD oscilloscope to Alix Paultre of Power Electronics News at the company's launch event. The WavePro HD high-definition oscilloscope de...