Let TI and MathWorks help you launch your next motor control design - in cooperation with Digi-Key

In this webinar, learn how you can quickly design a new motor control system using Embedded Coder® from MathWorks and the C2000™ family of microcontrollers from Texas Instruments. We walk through a demo of Simulink running two three-phase motors simultaneously using the F28069M LaunchPad™ development kit.

TI’s C2000™ MCUs have been focused on easing motor control design for over 20 years. From the older C24x DSP engine to the latest C28x floating-point DSP, C2000 MCUs provide a range of processing performance from 60 MHz to dual-core 200 MHz CPUs as well as analog and control peripherals necessary for premiere control systems. Along with the unique hardware solutions, C2000 MCUs also include the InstaSPIN-FOC™ and InstaSPIN-Motion™ software solutions, which ease three-phase motor design.

MathWorks provides software that enables modeling, simulation, and code generation of control systems using Simulink® and Embedded Coder®. Embedded Coder support for TI’s C2000 family of microcontrollers includes automated build and execution, processor-optimized code including DMC and IQMath libraries, and the ability to perform processor-in-the-loop (PIL) tests with execution profiling.


  • Matthew Pate -TI C2000™ MCUs Product Marketing. Matthew has been with Texas Instruments for over 16 years, and the C2000 MCU Business for 13 of those.  Involved in aspects of both HW and SW architecture and validation of the C2000 product lines during his career, Matthew is excited to help customers succeed with C2000 in their system.
  • Brian McKay – Embedded Systems Technical Marketing Manager. Brian McKay manages MathWorks solutions for embedded systems customers featuring TI hardware. Brian has been building customer solutions that combine MathWorks software with embedded hardware for over 10 years.
  • Antonin Ancelle - Embedded Targets Development Manager. Antonin Ancelle leads the embedded targets development at MathWorks for TI hardware platforms and many others. With a decade of experience developing and working with MathWorks tools, Antonin is passionate about sharing his technical knowledge with embedded engineers.

ZES Zimmer on testing advanced power electronics

In this video Bernd Neuner from ZES Zimmer talks to Alix Paultre for Electronic News TV at the 2017 Power Electronics Conference in Nuremberg. The discussion deals with the issues involving test and m...

Weidmüller discusses the need for a better signal and power interface

In this video Rene Arntzen from Weidmüller talks to Alix Paultre of Electronic News TV about the importance of a good signal and power interface for industrial equipment. There is currently no good ...

Mouser talks about the state of engineering development today

In this video Mark Burr-Lonnon and Graham Maggs of Mouser Electronics, a major international electronics distributor, talk to Alix Paultre about the state of engineering development today. With massiv...

Infineon launches a new family of configurable industrial drive boards

In this video Infineon explains their new family of configurable industrial drive boards at SPS-IPC Drives 2017. Intended to enable easy setup and deployment, the XMC-based automation boards can handl...

STMicro explains their STSPIN family of single-chip motor drivers

In this video STMicroelectronics explains their STSPIN single-chip motor drivers at SPS-IPC Drives 2017. The STSPIN family embeds can drive motors efficiently and with high accuracy, with an advanced ...